Gen 5 (Direct injection) 2014 + LT1, LT4, L83, L84, L86, L87 & L8T 5.3 / 6.2 / 6.6

$1,350.00

2014-21 Gen V LT1 / L83/L84/L86/L87/ 5.3/ 6.2 w/ 4L80E/ 6L80E/6L90E/8L90EStandalone Harness : Complete engine and transmission wiring harness,

Description

 

*Don’t forget to mail in your customer supplied T43 TCM (located inside your 6L80e transmission). Here is a VIDEO to help with the removal and installation of the TCM.

PARTS INCLUDED: 
Complete engine and transmission wiring Harness, Engine ECM (PCM-2001PCM-2003PCM-2004or PCM-2006), TCM (8 and 10 Speed only), Pedal (ACC-1007), o2 Sensors X2 (ACC-1039), MAF Sensor (ACC-1046), ECM Mounting Bracket (ACC-1050), 4″ LS3/LT1 Mass Airflow Tube/Holder (ACC-1201and Instruction Manual.

TRANSMISSION COMPATIBILITY:

All 8 + 10 Speed TCM Tuning REQUIRE your TUN (Transmission unique number). Without the TUN from your transmission you may experience shifting issues, communication errors, no gear progression or other issues. Warranties can not be honored without this information.

6L80/90Es: Must be 2013+ model year transmissions to work with a Gen 5 LT system.

8L80/90Es: 2014-2018 gen 1 model years currently compatible. The gen 2 8 speeds (2019+) are currently NOT compatible.

10L80/90Es: All 2017-2018 Gen 1 10 speed transmissions are compatible. 2019-21 2wd Truck/SUV and all 19+ Gm Performance and Camaro  are compatible. 2022+ Gen 2 10 speed transmissions with the electronic transmission range select (ETRS) are NOT compatible. These ETRS transmissions will only have a “park” and “out of park” position on the external shift lever on the driver side of the transmission.

FANS: Fan control functionality is dependent on the operating system your ECM requires. Depending on your particular setup fan operation cannot be guaranteed using a relay system like KIT-1010. Fan control and operation can only be guaranteed if using PAC-2800BT.

NOTES: This COMPLETE controller kit from PSI includes everything you need to get that Gen 5 LT engine and 6L80E/90E, 8L90E, 10L90E or manual transmission running in your project vehicle. Why use an aftermarket controller for your transmission when you can utilize the Factory controller just like the original vehicle! The kit includes hardware and components that don’t typically come with used engines, such as the wiring harness, mass airflow meter, tube with MAF mount, pedal, oxygen sensors, and programmed ECM/TCM – eliminating the need to source them separately. This controller system is a true stand-alone system for use in older vehicles, as all that’s needed to get a vehicle running with it are power and ground sources, a fuel pump able to support 78-psi (540 kPa) at the fuel rail, and an electric cooling fan.

CONNECTIONS FOR:

  • Fuse/Relay Box
  • Fuel Pump Control (Relay included)
  • Fan controls (Fan controller PAC-2800BT and Relays sold separately KIT-1010)
  • Check Engine Light, Speedo output, Tachometer, OBD2 Port
  • Accelerator Pedal
  • Throttle Body
  • MAF Sensor
  • MAP Sensor
  • Engine Coolant Temp Sensor
  • Alternator Control
  • (2) Upstream Oxygen Sensors
  • Crankshaft Position
  • Camshaft Position
  • Fuel Injectors
  • Coil Packs
  • Automatic or Manual Transmission control
  • Knock Sensors

ADDITIONAL ITEMS REQUIRED: E92 ECM, T43 TCM (LOCATED IN VALVE BODY OF 6L80E/6L90E TRANSMISSION), T87 (8L90E), Mass Airflow Sensor, Pedal, O2 Sensors