LS3 525 Hp 6L80E Transmission

Chevrolet Performance LS3 6.2L 480HP Engine 6L80E 2WD or 4 Wheel Drive Package

Sonnax 6L80E Billet 456 Shaft & Hub and Powerglide 45 Spline Clutch PackThrottle Position Sensor, Weatherpack, CCW rotation, External Arm PCS

$18,400.00

LS376/480—to our crate engine portfolio. The key to the power boost is the Hot Cam’s 0.525-inch lift on both the intake and exhaust sides, along with 219-degree/228-degree duration specs. That’s less lift on the intake side than the stock LS3 cam, but considerably more duration, allowing the valves to stay open longer to draw in more air from the rectangular-port L92-style heads.

SKU: LS3-480-6L80E Category:

Description

6L80E Connect and Cruise Packages

This is Chevrolet Performance new Connect-and-Cruise crate powertrain system. They’re factory-engineered engine-and-transmission combinations that include all the electronic control modules, wiring harnesses and other key components you need with the simplicity of one part number. The engines and transmissions for optimal performance and durability. The engine and transmission controllers are calibrated designed for retrofit installation in older vehicles, for easier and quicker installation and operation. In most causes there is no need for third-party tuning.

THE HOT CAM ADDS HEAT TO THE LS3
GM engineers took a production LS3 6.2L (376 cubic inches) and swapped the stock camshaft for the racing-inspired LS
Hot Cam (P/N 88958753), which delivered a stunning 480 horsepower and 463 lb.-ft. of torque. That’s nearly 14 percent
more power and torque from a simple camshaft change!

GM LS3 480 HP Engine and 6L80E Package Includes:
• LS3 480HP Engine
• CPP Engine Controller and Harness
• GM 6L80E 6-Speed Automatic Transmission Package w/ stall converter. Available in 2 Wheel Drive or 4 Wheel Drive.
• Chevrolet Performance 6L to LS install kit

Specifications:
Power: 480 HP @ 6200 RPM, 460 ft. lbs. of torque @ 4500 RPM
Displacement: 376 CID, 6.2L
Bore x Stroke: 4.060” x 3.620”
Compression Ratio: 10.7:1
Recommended Fuel: 92 Octane
Block: Cast Aluminum with 6 bolt cross bolted main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Hypereutectic Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .525” Intake / .525” exhaust
Cam Duration @ .050”: 219 deg. Intake / 228 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Aluminum L92 style ports
Combustion Chamber: 68cc
Valves: 2.165” Intake/ 1.590” Exhaust
Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6600

6L80E Specifications and Features:

• Output torque rating: 650 lb.-ft.
• Gear ratios: 1st: 4.02, 2nd: 2.36, 3rd: 1.53, 4th: 1.15, 5th:
0.85, 6th: 0.67
• Lightweight die-cast aluminum case contributes to dry
weight of approximately 195 lbs.
• Uses DEXRON VI premium fluid
• Does not include dipstick
• Includes truck-style production oil pan (use Shallow Pan Kit
P/N 19418242 for increased ground clearance)
• Transmission calibration has 3 mode, Normal Sport and Tap up Tap down
• Approximately 23.5″ long
• Kit includes controller and

 

Contents

GM LS3 525HP Engine and 6L80E Package Includes:
• GMPP LS3 525HP Engine with Installed
• CPP Engine Controller, 02 Sensors, Pedal and Harnes
• Stage 1 6L80E 6-Speed Automatic Transmission Package

GM LS3 525HP Crate Engine Includes:
• Corvette Rear Dump Exhaust Manifolds
• Ignition Coils, Plug Wires and Spark Plugs
• Intake, Injectors and Throttle Body
• 14" Auto Trans Flex plate
• Harmonic Balancer
• Front timing cover
• Aluminum Water Pump
• Passenger Side RH Oil Dipstick and Tube

6L80E Transmission Package is designed for "Plug and Play" use with Chevrolet Performance LS engine controllers.
Package Includes:
• GM 6L80E rear wheel drive, slip yoke or 4WD • Torque Converter (2500 Stall included)
• Oil Cooler Lines Manifold with -6 AN Male Fittings
• Converter dust shields and bolts
• Dipstick and tube
• Transmission ships with fluid
• Shift shaft nut
• Bell housing & converter bolts
• Transmission harness
• Custom programming of the internal transmission ECU
• Slip yoke (if applicable)

Specifications

Power: 525 HP @ 6300 RPM, 489 ft. lbs. of torque @ 4400 RPM
Displacement: 376 CID, 6.2L
Compression Ratio: 10.7:1
Recommended Fuel: 92 Octane
Block: Cast Aluminum with 6 bolt cross bolted main caps
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .551" Intake / .522" exhaust
Cam Duration @ .050": 204 deg. Intake / 211 deg. Exhaust
Cylinder Heads: Aluminum L92 style ports
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6600

6L80E Stage 1 Specifications and Features:
• Rated for maximum engine crankshaft torque 500 lb-ft (690 Nm)
• Gear Ratio • 1st - 4.03 • 2nd - 2.36 • 3rd - 1.53 • 4th - 1.15 • 5th - 0.85 • 6th - 0.67
• 3 shit patterns, Base, Full manual and your choice of a Sport or Tow haul
• Tow haul patterns have grade braking enabled
• Full Manual can be controlled by paddle shifters, Floor shifter with Tap or an individual tap switch

Warranty

General Motors limited 2 year / 50,000 mile parts & labor engine warranty and limited 1 year parts replacement only transmission warranty.

Related products