Chevrolet Performance LT4 Supercharged Wet Sump Performance Crate Engine,

Chevrolet Performance LT4 6.2L Supercharged Wet Sump Crate Engine

CHEVROLET Gen III IV LS 6L80E Transmission Kit Install KitGM 6l80E 2wd Flange Transmission Output Shaft Kit

$17,500.00

Chevrolet Performance LT4 Supercharged Wet Sump Performance Crate Engine, 650 horsepower and 650 lb.-ft. of torque. 9 Lbs of boost.

Available on backorder

SKU: ZGP- 19431955-LT4 Category: Tags: ,

Description

LT4 Supercharged Wet Sump Performance Crate Engine

Retail: $17500

Supercharged, 650 hp/ 650 lbs/ft. Torque, Wet Sump, Aluminum Block/Heads, Chevy engine.

For use with Connect & Cruise 4L80E (4 Speed), 6L80E 6 Speed) 8L90E ( 8-speed) or 10L90E 10 Speed automatic transmission packages. Can be used with T56 Manual Transmissions

LT4 SUPERCHARGED POWER 
As the heart of the Corvette Z06, the supercharged LT4 6.2L SC is the most powerful engine ever offered in a regular-production Chevrolet. It features a more-efficient, more-compact 1.7L Eaton R1740 TVS supercharger, which spins at up to 20,000 rpm. That’s enough to generate more than 9 pounds of boost and help produce 650 horsepower and 650 lb.-ft. of torque.

The LT4 is based on the same Gen V Small-Block architecture as the LT1 engine, with several unique features designed to support its higher output and the greater cylinder pressures created by forced induction. They include Rotocast A356T6 aluminum cylinder heads that are stronger and handle heat better than conventional castings, lightweight titanium intake valves and stronger forged aluminum pistons.

TECH SPECS
Part Number: 19431955 (wet sump)
Engine Type: Gen V Small-Block V-8
Displacement (cu in): 376 cu in (6.2L)
Bore x Stroke (in): 4.065 x 3.622 (103.25 x 92mm)
Block: Cast aluminum with 6-bolt, cross-bolted main caps
Crankshaft: Forged steel
Connecting Rods: Forged powdered-metal steel
Pistons: Forged aluminum
Camshaft Type: Hydraulic roller
Valve Lift (in): 0.492 intake / 0.551 exhaust
Camshaft Duration (@0.050 in): 189° intake / 223° exhaust
Cylinder Heads: A356T6 Rotocast aluminum; as cast with 65.5cc chambers
Valve Size (in): 2.130 intake / 1.590 exhaust
Compression ratio: 10:1
Rocker Arms (P/N 12619829): Investment cast, roller bearing trunnion
Rocker Arm Ratio: 1.81:1
Recommended Fuel: Premium pump
Maximum Recommended RPM: 6,600
Reluctor Wheel: 58x
Balanced: Internal

INSTALLATION NOTES
• Assembly does not include any electronics
• Use LT4 Engine Controller Kit for engine operation, P/N 19433248 or 19433249
• Includes 8-Bolt flexplate
• Intended for pre-1976 street vehicles or any off-road vehicles
• Not intended for marine applications
• Crankshaft has 8-bolt flywheel mounting pattern
• Engine includes direct injection, VVT and Active Fuel Management
• Chevrolet Performance control kits do not use the Active Fuel Management components on this crate engine

Chevrolet Performance Crate Engines include a 24-month or 50,000-mile/80,000-kilometer limited warranty.

Contents

GM LS3 430HP EROD Engine and 6L80E Package Includes:
• GMPP EROD LS3 430HP Engine with Installed Holley muscle car oil pan
• CPP Engine Controller, 02 Sensors, Pedal and Harness
• Stage 1 6L80E 6-Speed Automatic Transmission Package

GM LS3 430HP Crate Engine with Holley Oil Pan Engine Includes:
• Corvette Rear Dump Exhaust Manifolds
• Ignition Coils, Plug Wires and Spark Plugs
• Intake, Injectors and Throttle Body
• Down pipes with Catalytic Converters
• Evap Canister
• 14" Auto Trans Flex plate
• Harmonic Balancer
• Front timing cover
• Aluminum Water Pump
• Passenger Side RH Oil Dipstick and Tube

6L80E Stage 1 Specifications and Features:

• Rated for maximum engine crankshaft torque 500 lb-ft (690 Nm)
• Gear Ratio • 1st - 4.03 • 2nd - 2.36 • 3rd - 1.53 • 4th - 1.15 • 5th - 0.85 • 6th - 0.67
• 3 shit patterns, Base, Full manual and your choice of a Sport or Tow haul
• Tow haul patterns have grade braking enabled.
• Full Manual can be controlled by paddle shifters, Floor shifter with Tap or an individual tap switch

Specifications

Power: 430 HP @ 5900 RPM, 424 ft. lbs. of torque @ 4600 RPM
Displacement: 376 CID, 6.2L
Compression Ratio: 10.7:1
Recommended Fuel: 92 Octane
Block: Cast Aluminum with 6 bolt cross bolted main caps
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .551" Intake / .522" exhaust
Cam Duration @ .050": 204 deg. Intake / 211 deg. Exhaust
Cylinder Heads: Aluminum L92 style ports
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6600

6L80E Stage 1 Specifications and Features:

• Rated for maximum engine crankshaft torque 500 lb-ft (690 Nm)
• Gear Ratio • 1st - 4.03 • 2nd - 2.36 • 3rd - 1.53 • 4th - 1.15 • 5th - 0.85 • 6th - 0.67
• 3 shit patterns, Base, Full manual and your choice of a Sport or Tow haul
• Tow haul patterns have grade braking enabled.
• Full Manual can be controlled by paddle shifters, Floor shifter with Tap or an individual tap switch

Warranty

General Motors limited 2 year / 50,000 mile parts & labor engine warranty and limited 1 year parts replacement only transmission warranty.

Related products