Description

This is the harness only and does not include the controller. The TCM-2650 is designed for situations where a standalone transmission controller cannot control the transmission directly. Newer transmissions, including the GM 6L80, contain the factory transmission control module inside the valve body. These mechatronic valve body designs make it nearly impossible to directly control the transmission solenoids with a standalone transmission controller. It is also very difficult to remove the transmission and controller from the factory powertrain since all of the transmission parameters are received from other vehicle modules including the engine controller, body control module, etc. The PCS TCM-2650 is an all-in-one solution that will allow the 6L80E and 6L90E transmission with factory controller to be installed in any vehicle with any engine combination and maintain a fully functional transmission. It has been used in many applications and engine combinations, such as Cummin 2.8L, 4BT Diesels, Gen 1 , 2 and 3 GM engines. Whether they are carbureted or Fuel Injected, this system will allow you to use the GM 6 Speeds in practically any vehicle. Comes with a complete harness and the necessary software to program the TCM-2650 Module. The TCM-2600/2650 is used to enable the use of the GM 6l50e, 6L80E, 6l90E transmissions behind practically any engine. all that is needed is a Throttle position signal and Engine RPM.

The TCM-2650 is compatible with the GM 6L45/50, 6L80E/6L90E

TCM2650-4610